Introduction to Moveras, LLC.
Moveras manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions.
Welcome to the Moveras eLearning Website
Today, vehicle maintenance and repair is more complex than ever. Sophisticated computerized systems, and the demand for safety, performance and reliability are driving the evolution of more complex technologies. These new technologies in turn make it more important than ever to make sure that you can respond with the latest skills and techniques. In this rapidly changing aftermarket, knowledge and sound technical skills are often the best competitive advantage of all. At Moveras, we strive to keep our customers on the leading edge of technical skills – that is why we are offering an array of educational content that is easy to access. Thank you for trusting in us to provide you with the necessary tools to keep current.
Built Fresh, Built Strong, Built Smart.
Cursos disponibles
Cooler Replacement
Built Clean - Replace, don't flush! A clean, properly flowing transmission cooling system is the most important step to a long lasting transmission. Learn more about avoiding the #1 root cause for transmission installation failure.
Reprogramming / Reflashing / Relearning
85% of transmissions are electronically controlled. Every one of them require relearn to to achieve proper shift adapts. Learn more about using the RAP kit.
Electrical Diagnosis
In this class, we'll be covering Electrical Diagnosis. Today's vehicles utilize the T.C.M. or the P.C.M. to make complicated calculations and apply certain solenoid to activate a particular clutch or band. Most transmissions today don't even utilize valves in the valve body. They use a pulse width modulated solenoid to act directly on the component that it’s applying. This is why having good source voltage and proper connections to the source voltage are very important.
Scan Tool Diagnostics
In this class, we'll be covering the scan
tool diagnostic. It's important to use the right tool for the job, and when diagnosing a transmission, your typical O.B.D.2 code reader
is not going to cut it. You need a tool that's capable of reading O.E.
manufacturer specific codes, watching the data stream and activating bidirectional
controls.